Garmin G1000 Pilot's Manual page 189

Canceling Direct-to Navigation
Once a Direct-to is activated, the G1000 provides
navigation guidance to the selected destination until the
Direct-to is either replaced with a new Direct-to or flight
plan, or cancelled, or if the unit is turned off.
To cancel a Direct-to:
Press the Direct-to key to display the Direct-to
1.
Page.
2. Press the MENU key to display the Direct-to
options menu.
3. With 'Cancel Direct-To NAV' highlighted, press
the ENT key. If a flight plan is still active, the
G1000 resumes navigating the flight plan
along the closest leg.
Figure 7-34 Canceling Direct-to Navigation
190-00498-00 Rev. A
Specifying a Course to a Waypoint
During a Direct-to, the G1000 sets a direct great circle
course to the selected destination. The course to the
destination, using the course field on the Direct-to Page
can be manually defined.
To manually define the Direct-to course:
1.
2.
3.
4.
5.
Garmin G1000 Pilot's Guide for Cessna Nav III
MULTI FUNCTION DISPLAY
Press the Direct-to key.
Turn the small and large FMS knobs to select
the destination waypoint.
Press the ENT key to confirm the selected
waypoint, then turn the large FMS knob to
highlight the course field.
Turn the small and large FMS knobs to select
the desired course and press the ENT key.
Press the ENT key again to begin navigation
using the selected destination and course.
Figure 7-35 Manual Course Direct-to
7-53