Garmin G1000 Pilot's Manual page 72

PRIMARY FLIGHT DISPLAY
Procedures Window
The Procedures Window is enabled/disabled by
pressing the PROC key. The following options are
available from the Procedures Window:
• Activate Vector-To-Final
• Activate Approach
• Select Approach
• Select Arrival
• Select Departure
Figure 2-65 Procedures Window
Select Approach
Select Approach allows the pilot to choose a published
instrument approach for the destination airport or replace
the current approach with a new selection.
To select an approach for a direct-to or
flight plan destination airport:
1. From an active flight plan, press the PROC key
to display the Procedures options window.
Turn the large FMS knob to highlight 'Select
2.
Approach', then press the ENT key. A window
appears listing the available approaches for
the destination airport.
2-42
3.
4.
Garmin G1000 Pilot's Guide for Cessna Nav III
Figure 2-66 Approach
Turn the FMS knob to select the desired
approach, then press the ENT key. A window
appears listing the available transitions for the
approach.
Figure 2-67 Approach Transition
Turn the FMS knob to select the desired transi-
tion or vectors, then press the ENT key.
NOTE: The 'Vectors' option assumes that the pilot
will receive vectors from ATC to the final course
segment of the approach.
Figure 2-68 Select Approach Window
190-00498-00 Rev. A