Garmin G1000 Pilot's Manual page 58

PRIMARY FLIGHT DISPLAY
To change the zoom range:
Turn the joystick clockwise to increase or
counterclockwise to decrease the range. Zoom
ranges from 500 feet to 2,000 nautical miles.
To change the declutter level:
Press the INSET softkey.
1.
2. Press the DCLTR softkey to remove background
map details until the desired amount of detail
is depicted. The declutter level appears above
the softkey (i.e., DCLTR-1). Refer to the Multi
Function Display section for more details.
To enable/disable traffic data:
1. Press the INSET softkey.
Press the TRAFFIC softkey to display Traffic
2.
Information Service (TIS) or Traffic Advisory
System (TAS) traffic. Traffic symbology appears
next to the aircraft icon and in the bottom right
corner of the map.
Press the TRAFFIC softkey again to remove data
2.
from the map.
NOTE: TIS displays traffic within seven nautical
miles from 3,000 feet below to 3,500 feet
above the requesting aircraft, and includes
location, direction, altitude, and climb/descent
information.
NOTE: Refer to the Multi Function Display section
for more details about Traffic Advisory System
(TAS).
2-28
To enable/disable topographic data:
1.
2.
3.
To enable/disable terrain data:
1.
2.
3.
Garmin G1000 Pilot's Guide for Cessna Nav III
Press the INSET softkey.
Press the TOPO softkey to display topographic
land colors, which represent land elevation.
Press the TOPO softkey again to remove topo-
graphic data from the map.
NOTE: When topographic data is removed from
the display, all cartographic data is automatically
removed and the Jeppesen Nav Data is presented
on a black background.
Press the INSET softkey.
Press the TERRAIN softkey to display color-coded
terrain tiles, which are based upon the aircraft
current altitude. A mountain icon appears above
the zoom range in the lower right corner of the
map, showing that terrain is selected.
• Red (warning) – Land elevation is within 100
ft or above the aircraft current altitude.
• Yellow (caution) – Land elevation is greater
than 100 ft to 1,000 ft below aircraft altitude.
• Black – Land elevation greater than 1,000 ft
below aircraft altitude.
Press the TERRAIN softkey again to remove the
terrain data from the map.
NOTE: Terrain data is not displayed when the
aircraft latitude is greater than 75˚ N or 60˚ S.
NOTE: Refer to the Appendix for more details
about terrain.
190-00498-00 Rev. A