CONTROLS
The NAV Frequency window is controlled by knobs
and keys on the left, the COM Frequency window by
knobs and keys on the right.
The NAV controls:
• VOL/PUSH ID knob
– Turn to adjust the NAV radio volume level.
– Press to turn the Morse code ID ON and OFF.
• Frequency Transfer key
– Press to transfer the NAV frequencies between
the active and standby fields.
• Dual NAV tuning knob
– Turn to tune a NAV frequency in the NAV
tuning box (large knob for MHz; small knob
for kHz).
– Press to transfer the NAV tuning box between
the NAV1 and NAV2 radios.
190-00498-00 Rev. A
NAV Controls
VOL/PUSH
ID Knob
Frequency Transfer Keys
Dual NAV
• Turn to tune desired
• Press to change tuning box
Figure 3-3 NAV/COM Controls
Garmin G1000 Pilot's Guide for Cessna Nav III
The COM controls:
• VOL/PUSH SQ knob
– Turn to adjust the COM radio volume.
– Press to turn automatic squelch ON and OFF.
• Frequency Transfer key
– Press to transfer the COM frequencies between
the active and standby fields.
– Press and hold for two seconds to tune the
emergency frequency (121.500 MHz) in the
active COM field.
• Dual COM tuning knob
– Turn to tune a COM frequency in the COM
tuning box (large knob for MHz; small knob
for kHz).
– Press to transfer the COM tuning box between
the COM1 and COM2 radios.
VOL/PUSH
SQ Knob
Dual COM
Knob
Knob
frequencies.
positions.
NAV/COM
COM Controls
3-3