Table of Contents
Advertisement
5-4. Adjusting the intermediate stop position of the feeding frame (left) (For the
separately-driven feeding frame with a double-stepped stroke function)
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of
the sewing machine.
❷
❶
A
B
Loosen knob ❶ .
1)
2)
Adjust the intermediate stop position of the
feeding frame by turning knob ❷ so that it
stops slightly above the sewing product on
the machine.
Turning knob ❷ in direction A will increase
the height of the feeding frame in its inter-
mediate stop position or indirection B will
decrease it.
3)
After the adjustment, securely tighten knob
❶ .
Only the feeding frame (left) is capa-
ble of stopping in the intermediate
stop position.
– 28 –
Advertisement
Table of Contents
