Table of Contents
Advertisement
2-11. Example of operation
This clause gives an example of how to actually operate the device.
2-11-1. In the case both of the two bobbins have been taken out of the device or both
of the two bobbins are empty
A
B
F
< Data input screen >
E
< Bobbin check screen >
3)
Place the first bobbin in the bobbin setting section. Then, press
bobbin is taken in the device. (Refer to
for the bobbin setting procedure.)
4)
Subsequently, place the second bobbin in the bobbin setting section.
5)
As with step 6), press
6)
Now, the device starts winding bobbin. Wait a moment until the device completes winding of bob-
bin.
F to display the sewing screen. Once the sewing screen is displayed, sewing can be
Press
started.
1)
Turn the power to the device.
2)
Set the bobbin-thread winding length to be wound on a bobbin.
Open
ton.
Wait until the initialization operation of the AW device is com-
pleted.
C
<AW operation screen>
"I-4-5-2. How to fit a bobbin in the bobbin case" p.21
– 111 –
A device tab. Press
G
If you want to change the setting, press
D
C on the bobbin check screen to
return to the AW operation screen.
Press
screen to display the AW setting item list
screen.
"II-2-9-2. AW number of
(Refer to
stitches input mode, AW operation
mode and setting of the allowance
length of the remaining length" p.103
for the respective setting items.)
E in the similar manner.
B AW operation but-
D on the AW operation
E. The
Advertisement
Table of Contents
