Table of Contents
Advertisement
B
C
(2)
Pattern shortcut tab
It is possible to directly select a pattern without changing over the screen by registering the pattern
on the SHORTCUT button. It is also possible to change over the pattern with ease by registering the
patterns that you use frequently on the shortcut buttons. On the pattern shortcut tab display, the folders
Nos. 1 to 5 can be changed over. Ten different patterns can be registered at the maximum in one folder.
A
C
1. SHORTCUT button
tered using "15. Pattern shortcut key registration" function that is included in the list.
→ Refer to
2. Be aware that the feeding frame travels to the sewing start position for the selected
pattern when SHORTCUT button
② Editing the parameter
E
Edit the parameter value by pressing the numeric key buttons
③ Confirming the edited content
When ENTER button
finalized and the display is returned to the HOME tab display.
D
④ Cancelling the edited content
When CANCEL button
edit screen, the changed content is discarded and the display
is returned to the HOME table display.
1) Basic operation
① Selecting the pattern shortcut tab
Select the pattern shortcut tab with MULTIFUNCTION TAB
DISPLAY SELECTION button
② Changing over the display folder
When FOLDER CHANGEOVER button
D
B
folder is changed over.
③ Selecting a pattern
When SHORTCUT button
pattern is changed over to the pattern that is registered on the
SHORTCUT button.
"II-2-5-3. How to create a new cycle pattern"
B, +/- button
to
D is pressed, the edited content is
E is pressed on the parameter
C is not displayed unless a pattern has been regis-
C is pressed on the sewing screen.
– 42 –
C.
A.
B, the displayed
C is pressed, the
p.71.
Advertisement
Table of Contents
