Message No.
M623
M624
M626
M653
M669
M670
M671
Display message
– 131 –
Description
Motor installation angle fault
The motor encode value is too close to the origin
when the motor passes the origin sensor. Shift the
motor installation angle by a half rotation from the
current position.
Confirmation of shift to the magnetic pole
detection mode
Firstly detach the motor from the main body of sewing
machine. Then, carry out adjustment.
Confirmation of clearing of the USB resetting file
name
During formatting
Formatting is performed.
During data reading
Data is being read.
During data writing
Data is being written.
During data converting
Data is being converted.