Xy Travel Distance Tab - JUKI AMS-221F3020RSZ/AW-3 Instruction Manual

3P pedal
1) 2)
⇨
A
2) Place a workpiece to be sewn on the sewing product under the feeding frame (left). Lightly depress
pedal B, and the feeding frame (left) will stop in its intermediate stop position. Release the pedal,
and the feeding frame (left) will rise back to the initial position.
3) Position the workpiece. Further depress pedal B, and the feeding frame (left) will come down to the
lowest position to clamp the workpiece. Re-depress pedal B until it will go no further, the feeding
frame (left) will return to the intermediate stop position.
4) When pedal C is depressed while all feeding frames are in their lower position, computation of
the pattern enlargement / reduction is carried out. When pedal C is depressed again, the sewing
machine starts sewing.
(5)

XY travel distance tab

It is possible to move the pattern in parallel. Lower the feeding frame. Lower the feeding frame. Then,
set the travel distance by which the pattern is moved with TRAVEL button. Sewing cannot be performed
while this tab is selected. Select a different tab in prior in order carry out sewing,
A
D
2) Clearing travel distance
① Clearing the XY travel distance
Operate the pedal to lower the feeding frame. Then, press RESET button
the travel distance to the previous value, or keep the button held pressed for one second to clear
the travel distance to 0.0 mm.
Be aware that the feeding frame moves when the travel distance is cleared.
3)
⇨
B B
1) Basic operation
① Selecting the XY travel distance tab
Select XY travel distance tab
TAB DISPLAY SELECTION button.
② Setting the XY travel distance
Operate the pedal to lower the feeding frame. Then, set the
travel distance by which the pattern is to be moved with TRAV-
B
EL button
The XY travel distance cannot be set unless the feed-
ing frame is in its lower position.
[In case of 3P pedal]
*
4)
⇨
1)
C
B.
– 45 –
The aforementioned steps of
procedure 1), 2) and 3) can
be carried out in the reverse
order by setting the memory
switch U081 appropriately.
Place a sewing product under
the feeding frame. Depress
pedal A of the pedal switch,
and the feeding frame (right)
will come down to clamp the
sewing product.
A with MULTIFUNCTION
C shortly to return