Table of Contents
Advertisement
2-9-2. AW number of stitches input mode, AW operation mode and setting of the
allowance length of the remaining length
< AW operation screen >
Ⓐ
Ⓑ
Ⓒ
Ⓓ
Ⓔ
Ⓕ
< AW setting item list screen >
When you press
A
ting item list screen is displayed.
On the AW setting item list screen, the below-listed data items can
be set by pressing the buttons corresponding to the respective data
items.
Ⓐ : Selection of the bobbin changing method
Ⓑ : Setting of the thread winding length
Ⓒ : Setting of the allowance length of the remaining thread
Ⓓ : Setting of the thread raveling strength
Ⓔ : Adjustment of the bobbin thread end length
Ⓕ : Percentage of allowance of thread consumption
Detailed explanation will be given from the next page.
– 103 –
A on the AW operation screen, the AW set-
Advertisement
Table of Contents
