C
⑦ Setting enable/disable C of the reference position cor-
rection
In this step of procedure, enable/disable of the position correc-
tion that has been set in the previous procedure is set.
The enable/disable status is changed over by pressing enable/
disable changeover button
[In the case the reference position correction is set to
I
enable
The correction amount for the reference position is applied.
The reference position is corrected according to the effective
number of reference positions.
[In the case the reference position correction is set to
disable
The correction amount for the reference position is not applied.
⑧ Confirming enable/disable C of the reference position
correction
When enter button
reference position correction is confirmed, and the screen
returns to the shape confirmation screen.
– 65 –
C.
]
]
I is pressed, enable/disable of the