Table of Contents
Advertisement
3-5. Installing the panel
❺
❷
❹
❸
❶
❻
– 9 –
■ Installing the IP-500
Fix operation panel installing plate ❸ to an
1)
optional place on the table with two wood
screws ❹ .
As a guide, two perforated holes ❶ (two lo-
cations) have been factory-made on the right-
hand side of the table.
Pass panel cable ❷ through hole ❺ in the
2)
table, and connect the cable to the connector
CN101 ❻ (uppermost connector) of the elec-
trical box.
Install the panel at the position
where X-move cover or head grip
does not interfere with it since
breakage of the panel will be caused.
Advertisement
Table of Contents
