(3)
Thread tension tab
It is possible to change the reference value of thread tension during sewing.
If the reference value of thread tension for a medium pattern is changed, "*" mark will be added to the
pattern type display. → Refer to
A
B
E
2) Checking the registered content of the pattern shortcut
key
① Displaying the pattern shortcut registration list
When PATTERN REGISTRATION DISPLAY button
the pattern shortcut registration list screen is displayed.
② Checking the patterns
It is possible to select a folder and check the patterns regis-
tered in the folder. Nothing will be displayed if no pattern is
registered in the folder.
③ Completing the check procedure
When CLOSE button
vious screen.
"II-2-4-9. Display of the flag during the change procedure"
C
– 43 –
E, the screen is returned to the pre-
① Selecting the thread tension tab
Select thread tension tab
MULTIFUNCTION TAB DISPLAY SE-
LECTION button.
② Setting the reference value of
thread tension
Set the reference value of thread ten-
sion with +/- button
When +/- button
pressed during sewing, the new refer-
ence value of thread tension is imme-
diately reflected.
* In the case of using the thread tension
controller No. 3, its use must be set on
a pattern-by-pattern basis.
Refer to "4-6. (6) Thread tension
controller No. 3" in the Instruction
Manual for the IP-500.
D,
p.56.
A with
B.
C is