JUKI AMS-221F3020RSZ/AW-3 Instruction Manual page 126

Error
Description of error
code
Grease-up error
E221
When the sewing machine sews
sixty million stitches, sewing is
disabled. It is possible to clear
with memory switch U245 .
→ Refer to
"III-1-9. Replenishing
the designated places with
grease" p.141.
Head tilt confirmation
E302
When head tilt sensor is OFF.
E307 External input command time
out error
Input is not performed for a fixed
period of time with the external
input command of vector data.
E308 Time-out error of wait terminal
There is no input to wait terminal
for a certain period of time.
E309 Remaining thread removal shaft
sensor error
Offset amount error
E372
Offset amount at the time of
pattern correction has exceeded
the upper limit.
E373 Rotation amount error
Rotation amount at the time of
pattern correction has exceeded
the upper limit.
E374 Scale ratio error
When the scale ratio does not fall
within the specified range at the
time of pattern correction.
E406 Password mismatch error
E415 File name null character error
No character is specified for the
file name.
Display message
– 121 –
Place of
How to recover
recovery
Possible to re- Data input
start after reset. screen
Possible to re- Previous
start after reset. screen
Possible to re- Data input
start after reset. screen
Turn OFF the
power
Turn OFF the
power
Possible to re- Previous
start after reset. screen
Possible to re- Previous
start after reset. screen
Possible to re- Previous
start after reset. screen
Possible to re- Password
start after reset. input
screen
Possible to re- Character
start after reset. input
screen