Table of Contents
Advertisement
5. OPERATION OF THE SEWING MACHINE
5-1. Sewing
2P pedal
A
3P pedal
1)
2)
⇨
A
2) Place a workpiece to be sewn on the sewing product under the feeding frame (left). Lightly depress
pedal B, and the feeding frame (left) will stop in its intermediate stop position. Release the pedal, and
the feeding frame (left) will rise back to the initial position.
3) Position the workpiece. Further depress pedal B, and the feeding frame (left) will come down to the
lowest position to clamp the workpiece. Re-depress pedal B until it will go no further, the feeding
frame (left) will return to the intermediate stop position.
4) Depress pedal C when both frames of the feeding frame rest in the lowest position, and the sewing
machine will start sewing.
B
3)
⇨
B
B
[In case of 2P pedal]
1) Set a workpiece on the sewing machine.
2) Depress the pedal switch A, and the feeding
frame will come down. Depress it again, and
the feeding frame will go up.
3) Depress the pedal switch B after the feeding
frame has come down and the sewing machine
will start sewing.
4) After the sewing machine completes sewing,
the needle point will return to the start point
and the feeding frame will go up.
[In case of 3P pedal]
* Steps 1), 2) and 3) can be
4)
1) Place a sewing product under
⇨
C
– 25 –
operated in the reverse
order by setting of memory
switch U081.
the feeding frame. Depress
pedal A of the pedal switch,
and the feeding frame (right)
will come down to clamp the
sewing product.
Advertisement
Table of Contents
