(6)
Bobbin information tab
→ Refer to
"II-2-10. Bobbin information tab"
(7)
Device tab
*1
→ Refer to
"II-2-11. Example of operation"
*1 : Displayed only for the AW-3 device.
2-4-4. How to change the parameter
Parameters of the selected pattern can be changed.
WARNING :
After you have changed the XY enlargement / reduction ratio, be sure to check the pattern shape.
If the pattern exceeds the feeding frame size, the needle can interfere with the feeding frame
during sewing, posing a risk of needle breakage, etc.
A
B
*1
p.110.
p.111..
① Displaying the HOME tab of the pattern setting screen
Display the pattern setting screen. Then, select HOME tab
A with the MULTIFUNCTION TAB SELECTION button.
② Displaying the parameter setting screen
When the parameter B to change is selected from HOME tab
A, the parameter setting screen is displayed.
Parameters that can be changed are as listed on the next
page.
– 46 –