Table of Contents
Advertisement
(4)
Enlargement / reduction tab
It is possible to enlarge / reduce the pattern immediately before starting sewing.
Enlargement / reduction of the pattern is computed, in the aforementioned case, by the "number of
stitches fixing method (by increasing / decreasing the number of pitches) regardless of the memory
switch setting.
In the case enlargement reduction is carried out on the enlargement / reduction tab display, the pedal
switch operating method is different from that for the normal sewing only for the first sewing after the
enlargement / reduction ratio is changed.
From the second sewing and beyond, the pedal switch can be operated in the method employed for the
normal sewing.
D
2P pedal
A
① Selecting the enlargement / reduction tab
Select enlargement / reduction tab
TION TAB DISPLAY SELECTION button.
② Setting the enlargement / reduction ratio
Set the enlargement / reduction ratio with +/- button
E.
E
③ Computing the enlargement / reduction and starting
sewing
Carry out computation of the enlargement / reduction of the
pattern by operating the pedal. Then, start sewing by operat-
ing the pedal again. (For the operating the pedal, refer to
Sewing" p.25
[In case of 2P pedal]
1)
2)
3)
B
4)
5)
– 44 –
.)
Set a workpiece on the sewing machine.
Depress the pedal switch A, and the feeding
frame will come down. Depress it again, and
the feeding frame will go up.
Lower the feeding frame. Then press pedal
switch B to carry out computation of the en-
largement / reduction of the pattern.
Depress pedal switch B again to start sew-
ing.
After the sewing machine completes sewing,
the needle point will return to the start point
and the feeding frame will go up.
D with MULTIFUNC-
"5-1.
Advertisement
Table of Contents
