To Use The Feed Plate Of The Ams-221En Series - JUKI AMS-221F3020RSZ/AW-3 Instruction Manual

4-3. To use the feed plate of the AMS-221EN Series

If you want to use the feed plate of the AMS-221EN Series, the optional feed plate interchangeable
plate set is required. Place an order for the interchangeable plate set of the following part number.
It should be noted that the feeing frame of the AMS-221EN Series can be used with the AMS-221F as it
is.
For AMS-221F △△ 3020
[Installation procedure for the feed plate interchangeable plate set]
❷
❶
For 3020
❹
JUKI interchangeable plate set part No.
40218950
1)
2)
❸
3)
❸
❺
❶
– 158 –
Attach pin ❷ to feed plate interchangeable plate
❶ .
Remove feed plate screw ❸ . Remove feed
plate ❹ . This screw will be used later.
Install feed plate interchangeable plate ❶ . In-
stall it using screw ❸ you have removed in the
aforementioned step 2) and washer ❺ . Spring
washer is not used.
* The feed plate of the AMS-221EN Series
should be installed with the screw, washer
and spring washer that are included in the
set.