JUKI AMS-221F3020RSZ/AW-3 Instruction Manual page 127

Error
Description of error
code
Keylock reset error
E417
Keylock cannot be reset.
E418 Renaming disabled error
Renaming is disabled since the
original name is used for cycle
data.
E703 Panel is connected to the
sewing machine which is not
supposed. (Machine type error)
When the machine type code of
system is not proper in the initial
communication.
E704 Inconsistency of system
version
System software version
is inconsistent in the initial
communication.
Device fault due to direct-drive
E715
failure
Device fault due to rotation
E716
failure
E717 Device fault due to nozzle failure
E718 Device fault due to moving knife
failure
E719 Device failure due to thread-
feeding failure
AW device fault (origin error)
E720
E721 AW device fault (Remaining-
thread removal position bobbin-
sensor error)
Display message
– 122 –
Place of
How to recover
recovery
Possible to re- Previous
start after reset. screen
Possible to re- Previous
start after reset. screen
Possible to rewrite Commu-
program after nication
pressing down screen
communication
switch.
Turn the power Commu-
OFF (Program nication
can be rewritten screen
after pressing the
communication
button).
Turn OFF the
power
Turn OFF the
power
Turn OFF the
power
Turn OFF the
power
Turn OFF the
power
Turn OFF the
power
Turn OFF the
power