Table of Contents
Advertisement
5) USB port
■ Inserting a device into the USB port
■ Disconnecting a device from the USB port
Cautions when using the media
• Do not wet or touch it with wet hands. Fire or electric shock will be caused.
• Do not bend, or apply strong force or shock to it.
• Never perform disassembling or remodeling of it.
• Do not put the metal to the contact part of it. Data may be disappeared.
• Avoid storing or using it in the places below.
Place of high temperature or humidity / Place of dew condensation /
Place with much dust / Place where static electricity or electrical noise is likely to occur
Detach the cover from the right side face of the IP-
500. Insert a USB thumb drive into the USB port.
Then, copy the data to be used from the IP-500
onto the main body of sewing machine.
Remove the USB device. Put the cover back in
place.
– 33 –
Advertisement
Table of Contents
