4. OPTIONAL
4-1. Table of Needle hole guide
Needle used
Size
Part No.
#14 to #18
40229581
#18 to #21
40229580
#21 to #23 *
40225679
1
* In the case of using the stainless-steel throat plate, it is necessary to use the stainless-steel type
needle hole guide.
Needle used
Size
#09 to #11
B1601210D0E (OP)
#11 to #14
40023632 (H type)
#14 to #18 *
2
B1601210D0FA (OP)
#18 to #21
B1601210D0BA (G type)
#22 to #23
B1601210D0CA (OP)
*
: G type installed needle (DP × 17 #23)
1
: H type installed needle (DP × 17 #18)
*
2
・ H type : Applicable count of thread : #30 to #08
・ G type : Applicable count of thread : #20 to #05
・ (OP) means the optional.
4-2. Silicon oil tank
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of
the sewing machine.
❷
❸
❶
❹
If the thread twists hard on silicon oil
tank base ❻ (40096982), reverse the
direction of winding the thread.
Part No.
(Stainless steel
type)
40229583
ø 2.0
40229582
ø 2.4
40227941
ø 3.0
Intermediate presser
Part No.
❺
❻
Needle hole guide
Needle hole
diameter
For medium-weight to heavy-weight materials
(H type)
For heavy-weight materials (OP)
For extra heavy-weight materials (OP)
(Supplied with G type models)
Size (øA × øB × H × L)
ø 1.6 × ø 2.6 × 5.7 × 37.0
ø 2.2 × ø 3.6 × 5.7 × 38.5
ø 2.2 × ø 3.6 × 8.7 × 41.5
ø 2.7 × ø 4.1 × 5.7 × 38.5
ø 3.5 × ø 5.5 × 5.7 × 38.5
The G type model is provided with silicon oil tank
asm. (40097301) as an accessory. (For the types
of models other than G type, this device can also
be retrofitted as an option.)
The silicon oil tank asm. should be fixed on the
sewing machine by means of setscrews ❶ (SM-
4041055SP) and ❷ (SM4042055SP) supplied with
the unit. To tighten setscrew ❷ , tighten it together
with thread guide collar ❸ (11315108), silicon oil
tank thread guide ❹ (40010414) and thread guide
setscrew washer ❺ (WP0501046SC). Silicon oil
tank thread guide ❹ (40010414) should be placed
so that it is in parallel with silicon oil tank base ❻
(40096982).
– 157 –
Application
øA
H
øB
L