3-7. Installing the thread stand
Assemble the thread stand device and place it in hole ❸ in the back of right section of the table.
1)
Tighten locknut ❶ to fix the thread stand.
2)
When ceiling wiring is possible, pass the power cord through spool rest rod ❷ .
3)
[ For the AMS-221F △△ 3020RSW ]
Assemble another thread stand device and place it in the back of left section of the table. Then, secure
the thread stand device with nut ❶ as with the same way.
❸ ❸
– 11 –
❷
❶