Table of Contents
Advertisement
Error
Description of error
code
Pattern data size over
E024
Memory size is over.
E030
Needle bar position missing
error
Needle bar is not in the
predetermined position.
Air pressure drop
E031
Air pressure is dropped.
E032
File interchanging error
File cannot be read.
E040
Sewing area over
E043
Enlarging error
Sewing pitch exceeds Max. pitch.
E045
Pattern data error
E050
Stop switch
When stop switch is pressed
during machine running.
E052
Thread breakage detection
error
When thread breakage is
detected.
E061
Memory switch data error
Memory switch data is broken or
revision is old.
E074
Remaining-thread removal error
After the completion of the bobbin
changing, the thread remaining
on the used bobbin could not be
removed.
Display message
– 119 –
Place of
How to recover
recovery
Possible to re-
Data input
start after reset.
screen
Turn hand
Data input
pulley to bring
screen
needle bar to its
predetermined
position.
Re-start is
Previous
enabled after
screen
resetting the
machine following
the restoration of
the air pressure.
Possible to re-
Data input
start after reset.
screen
Possible to re-
Sewing
start after reset.
screen
Possible to re-
Data input
start after reset.
screen
Possible to re-
Data input
start after reset.
screen
Possible to re-
Step
start after reset.
screen
Possible to re-
Step
start after reset.
screen
Turn OFF the
power
Bobbin
Refer to
"III-2-13.
Error display and
check
error handling
screen
procedure"
p.114
for the
error resetting
method.
Advertisement
Table of Contents
