Table of Contents
Advertisement
2-9-1. Operating the AW
A
< Data input screen >
When you press
bobbin is loaded on the sewing machine, however, the bobbin check screen will be displayed; and if an
error related to the AW-3 device has occurred, the error screen will be displayed. On these screens, the
error will be reset by completing loading of a bobbin.
The AW operation screen is displayed after resetting the error.
Ⓐ
Ⓑ
Ⓒ
Ⓓ
Ⓔ
< AW operation screen >
< Bobbin check screen >
A on the data input screen, the AW operation screen is normally displayed. If no
When one of the following buttons is pressed on the AW operation
screen, the corresponding independent operation of AW can be
B
carried out.
Press
Ⓐ : Change of the bobbin
Ⓑ : Removal of the bobbin
Ⓒ : Loading of an empty bobbin
Ⓓ : Loading of a thread-wound bobbin
Ⓔ : Nozzle air
Detailed explanation will be given from the next page.
B to close the screen.
Be aware that an error can be caused if the bobbin
in hook ❶ is directly changed, etc. by hand without
operating the AW operation screen after turning the
power ON.
– 100 –
< AW error screen >
Advertisement
Table of Contents
