Table of Contents
Advertisement
(2) How to correct the position on the device-by-device basis
For the correction of position on the device-by-device basis, the position correction amount can be set
with reference to arbitrary coordinates. The correction of position can be set on the list screen.
A
① Displaying the list screen
Display the list (maintenance personnel level) screen by keep-
ing M button
setting screen.
When
vice-by-device pattern position correction screen is displayed.
1. Immediately after turning the power ON, the "pat-
tern correction" function cannot be selected. It is
necessary to select a pattern, and press the ready
key to display the sewing screen. Then, the "pat-
tern correction" function is enabled.
2. If the presser foot is lifted to its upper position
when the "pattern correction" function is selected,
the presser foot will be brought to its lower posi-
tion. It is therefore necessary to take care not to
allow your fingers to be caught under the presser
foot.
② Setting coordinates of the reference position
B
When reference position setting button B is pressed, the nu-
meric value input screen is displayed.
C
Enter coordinates of the reference position of the device by
means of the numeric keypad.
– 66 –
held pressed for three seconds on the
A is selected, the de-
Advertisement
Table of Contents
