<AW error screen>
2-14-2. Detection of errors during sewing
<AW error screen>
In the case "E074 Remaining-thread removal error", "E075 Tan-
gling error", "E076 Bobbin winding error", "E077 Threading error,
or thread trimming" has been detected, the AW error screen will be
displayed.
On this screen, the error is reset by loading an empty bobbin or
a thread bobbin in the AW device. The item to be operated differs
with the error number.
E is pressed, the AW setting screen is displayed. On
When
E
this screen, settings of the AW can be changed.
In the case an error related to the AW device is detection during
sewing, the AW error screen will be displayed after the sewing ma-
chine has finished sewing and stopped.
The error resetting procedure is same with the error detected under
the normal state.
Refer to
"II-2-14-1. Error detection under the normal condi-
tions" p.116
for detailed functions.
– 117 –