Table of Contents
Advertisement
F
③ Teaching correction amount
When teaching button
tion teaching screen is displayed.
When move button
travels from the reference-position coordinates, and the travel
amount is displayed as the correction amount.
D
When teaching button
E
er foot travels to the reference-position coordinates.
Take care of this operation of the presser foot.
④ Confirming the correction amount
When enter button
is confirmed, and the screen returns to the pattern position
correction screen.
⑤ Setting enable/disable F of the reference position cor-
rection
In this step of procedure, enable/disable of the position correc-
tion that has been set in the previous procedure is set.
The enable/disable status is changed over by pressing enable/
disable changeover button
[In the case the reference position correction is set to
G
enable
The correction amount for the reference position of the device
is applied.
The reference position is corrected according to the number of
effective reference positions.
[In the case the reference position correction is set to
disable
The correction amount for the reference position of the device
is not applied.
⑥ Confirming enable/disable F of the reference position
correction
When enter button
reference-position correction is confirmed, and the screen
returns to the list (maintenance personnel level) screen.
– 67 –
C is pressed, the position correc-
G is pressed, the presser foot
C is pressed, the press-
E is pressed, the correction amount
F.
]
]
G is pressed, enable/disable of the
Advertisement
Table of Contents
