Verifying Connectivity To Media Server; Verifying That Sipi Is Translated; Upgrading The Sipi Firmware Version (If Necessary) - Avaya S8400 Installing And Configuring

Chapter 6: IP interface configuration

Verifying connectivity to media server

1. If not already open, open and log in to Maintenance Web Interface as craft.
2. Under Diagnostics, click Ping and select Other server(s), All IPSIs, UPS(s), Ethernet
switches to verify connectivity to these units.
3. Click Execute Ping.
4. Verify that all endpoints respond correctly.

Verifying that SIPI is translated

1. Open a SAT session on the media server.
2. Type list ipserver-interface and press Enter.
3. Verify that the SIPI circuit pack is translated.

Upgrading the SIPI firmware version (if necessary)

You may need to upgrade the firmware on the SIPI.
1. On the Maintenance Web Interface under IPSI Firmware Upgrades, click IPSI Version.
2. Select Query All and click View IPSI Version.
3. Verify the firmware release for the SIPI.
4. If an upgrade is required, follow the procedures in Firmware Download Procedures, which
can be accessed from:
ftp://ftp.avaya.com/incoming/Up1cku9/tsoweb/firmware/TNpackFirmwareDownloadInstructions.pdf
54
Installing and Configuring the Avaya S8400 Media Server February 2006