Agilent Technologies 16522A
To build a User Symbol Table
You may want to build a symbol table to make inserting values into your
program easier. You can name a symbol for one value in a label and insert
that symbol into your vector sequence where you need it.
From the Format menu select the Symbols field at the right of the
1
menu.
Set the desired Label, Base, and Symbol Width.
2
Symbols are specific for a given label. Symbol width determines the width of
the symbolic name displayed in the Sequence menu.
Select the Symbol field, then enter a name for the symbol.
3
Select the desired symbol Type, then enter the Pattern/Start and Stop
4
values.
The type is either a pattern or a range. A range provides a symbolic method
for defining values within a specified range.
If you want to add more symbols, select the Symbol field, then select
5
Add a Symbol, and repeat steps 2 through 4.
Select Done.
6
2
3
4
Using the
To build a User Symbol Table
1–17