Table of Contents
Advertisement
Agilent Technologies 16522A Reference
The Sequence Menu
The Sequence Menu
Use the Sequence menu to build your test vector files. The Agilent 16522A
provides for two sequences, an initialization sequence and a main sequence.
In single run mode the vectors are output from the first vector in the
initialization sequence to the last vector of the main sequence. The last
vector of the main sequence will be held at the outputs until run is executed
again.
In repetitive run mode the vectors in the initialization sequence will be
output from first to last one time, then the main sequence will repetitively
output the vectors in that sequence until the stop field is pressed. The vector
being output when stop is acknowledged by the module will be held at the
outputs until run is executed again.
The initialization sequence can be empty in which case it will be ignored.
The main sequence must contain at least two vectors to output. The
Sequence menu is shown below.
2–6
Advertisement
Table of Contents
