Table of Contents
Advertisement
REMove
Command
The REMove command allows you to remove one or several lines from the
pattern generator program. If only one parameter number is given, that line
number is deleted. If two numbers are given, the range of lines between those
two values inclusive is deleted. The command REMove ALL deletes the entire
program.
Command Syntax:
SEQuence:REMove{ <program line number[,<program
line range>]|ALL>}
an integer specifying the program line to be removed
<program line
number>
an integer specifying the last line number in a range of lines to remove.
<program line
range>
Example
OUTPUT XXX;":SEQ:REM 1,4"
Programming the Agilent 16522A
REMove
3–35
Advertisement
Table of Contents
