Delay - Agilent Technologies 16522A User Manual

DELay

Command/Query
The DELay command is used to specify the clock out delay. The clock out
delay setting allows positioning of the clock with respect to the data. The
delay setting that corresponds to zero is uncalibrated and must be measured
by the user to determine the basic clock/data timing. Subsequent settings
delay the clock approximately 1.3 ns per step.
The query returns the current clock out delay value.
Command syntax :FORMat:DELay<delay_arg>
integer from 0 through 9
<delay_arg>
Query syntax :FORMat:DELay?
Returned format [FORMat:DELay]<delay_arg>
Programming the Agilent 16522A
DELay
3–19