To Inspect The Module; To Prepare The Mainframe - Agilent Technologies 16522A User Manual

To inspect the module

Inspect the shipping container for damage.
1
If the shipping container or cushioning material is damaged, keep them until
you have checked the contents of the shipment and checked the instrument
mechanically and electrically.
Check the supplied accessories.
2
Part Number
16500-41201
16522-61601
16522-61602
16522-61603
Inspect the product for physical damage.
3
Check the module and the supplied accessories for obvious physical or
mechanical defects. If you find any defects, contact your nearest Agilent
Technologies Sales Office. Arrangements for repair or replacement are
made, at Agilent Technologies' option, without waiting for a claim settlement.

To prepare the mainframe

Turn off the mainframe power before removing, replacing, or installing the
C A U T I O N
module.
Electrostatic discharge can damage electronic components. Use grounded
C A U T I O N
wrist straps and mats when performing any service to this module.
Turn off the mainframe power switch, then unplug the power cord.
1
Disconnect any input or output connections.
Plan your module configuration.
2
If you are installing a one-card module, use any available slot in the
mainframe. If you are installing a multi-card module, use adjacent slots in the
mainframe.
Description Qty
Ribbon cable ID clip 6
Data output cable 5
Clock cable 1
Interconnect cable 1
Installation

To inspect the module

5–3