Table of Contents
Advertisement
Programming the Agilent 16522A
Mainframe Commands
Subsystem
INTermodule Subsystem
The INTermodule Subsystem commands are used to specify intermodule
arming between multiple modules.
Subsystem
MMEMory
The MMEMory Subsystem provides access to both disk drives for loading and
storing configurations.
Command/Query
MENU
The MENU command selects a new displayed menu. The first parameter (X)
specifies the desired module. The optional second parameter specifies the
desired menu in the module (defaults to 0 if not specified). The query
returns the currently selected (and displayed) menu.
For the Agilent 16522A Pattern generator:
•
X,0 - Format Menu
•
X,1 - Sequence Menu
•
X,2 - Macro Menu
X = slot number that contains the pattern generator master card.
Command/Query
RMODe
The RMODe command specifies the run mode (single or repetitive) for a
module or intermodule. If the selected module is configured for intermodule,
the intermodule run mode will be set by this command. The RMODe query
returns the current setting.
3–6
Advertisement
Table of Contents
