Table of Contents
Advertisement
Using the
Agilent Technologies 16522A
To set up the configuration
Set the Clock Period for an internal clock or the Clock Frequency for
3
an external clock.
The external clock frequency information is required to select the
appropriate operating mode. Operating the pattern generator at an external
clock frequency higher than selected will result in erroneous operation.
Set the Clock Out Delay if a delay is needed.
4
Setting a delay is useful when using the clock out edge as a read strobe. If
you do not set the Clock Out Delay, the value is uncalibrated.
2
1
1–4
4
3
Advertisement
Table of Contents
