Table of Contents
Advertisement
Programming the Agilent 16522A
PROGram
Command Syntax
:MACRo<m#>:PROGram <line_number>,
[<optional_label>,]{ NOOP | WAIT,<event> | SIGNal
| REPeat,<count> | BREAK }
,<data_value>,<data_value>,...
integer specifying the line of instruction/data to be modified
<line_number>
a string of up to six characters specifying a label
<optional_
label>
<event>
{ A | B | C | D | IMB}
integer repeat count
<count>
macro number (integer 0 through 99)
<m#>
parameter number (integer 0 through 9)
<p#>
a string in one of the following forms:
<data_value>
'#B01...' for binary
'#Q01234567...' for octal
'#H0123456789ABCDEF...' for hexadecimal
'0123456789...' for decimal
PARameter<p#>
Query Syntax:
:MACRo<#>:PROGram? <line_number>
Returned Format:
[:MACRo<#>:PROGram]
<event> | SIG IMB | BREAK
LOOP # REPEAT # TIMES | END LOOP #
Macro# ()
3–46
<line_number>, { NOOP | WAIT
| MACRO END | START
},<data_value>, <data_value>, ...
| MACRO
Advertisement
Table of Contents
