Table of Contents
Advertisement
Installation
To prepare the mainframe
Loosen the thumb screws.
3
Cards or filler panels below the slots intended for installation do not have to
be removed.
Starting from the top, loosen the thumb screws on filler panels and cards that
need to be moved.
Starting from the top, pull the cards and filler panels that need to be
4
moved halfway out.
All multi-card modules will be cabled together. Pull these cards out together
C A U T I O N
to prevent damage to the cables and connectors.
Remove the cards and filler panels.
5
Remove the cards or filler panels that are in the slots intended for the module
installation. Push all other cards into the card cage, but not completely in.
This is to get them out of the way for installing the module.
5–4
Advertisement
Table of Contents
