Table of Contents
Advertisement
Loading ASCII files
LABel
LABel
Command
LABel <name_str>,<width>
label string up to six characters in length.
<name_str>
integer number of bits in the label (1 through 32).
<width>
The LABel command is a special means of specifying labels for use by an
ASCII file. The label bits are assigned from most to least significant bits
across the output pods. Labels may only contain adjacent bits. The user
must specify the label string and the width of the field. The label base is
hexadecimal.
There is a maximum of 126 labels. No label may be more than 32 bits wide. If
a label is too wide (too many bits) for the remaining unused pattern
generator bits, it will be discarded. Use of the FORMat:LABel command after
the ASCDown command will generate an error.
Example
LABel 'TEST1',7
LABel 'ADDR',13
6–4
Advertisement
Table of Contents
