Table of Contents
Advertisement
Programming the Agilent 16522A
BASE
BASE
Command
The BASE command sets the base in which symbols for the specified label
will be displayed in the symbol menu. It also specifies the base in which the
symbol offsets are displayed when symbols are used.
Note that BINary is not available for labels with more than 20 bits assigned.
In this case the base will default to HEXadecimal.
Command Syntax:
:SYMBol:BASE <label_name>,<base_value>
string of up to 6 alphanumeric characters
<label_name>
<base_value>
{BINary | HEXadecimal | OCTal | DECimal | ASCii }
Example
OUTPUT XXX;":SYMBol:BASE 'DATA',HEXadecimal"
3–50
Advertisement
Table of Contents
