Table Of Contents - Agilent Technologies 33220A User Manual

Contents
Chapter 1 Quick Start 13
To Prepare The Function Generator For Use 15
To Adjust The Carrying Handle 16
To Set The Output Frequency 17
To Set The Output Amplitude 18
To Set A Dc Offset Voltage 20
To Set The High-Level And Low-Level Values 21
To Select "DC Volts" 22
To Set The Duty Cycle Of A Square Wave 23
To Configure A Pulse Waveform 24
To View A Waveform Graph 25
To Output A Stored Arbitrary Waveform 26
To Use The Built-In Help System 27
To Rack Mount The Function Generator 29
Chapter 2 Front-Panel Menu Operation 31
Front-Panel Menu Reference 33
To Select The Output Termination 35
To Reset The Function Generator 35
To Output A Modulated Waveform 36
To Output An Fsk Waveform 38
To Output A Pwm Waveform 40
To Output A Frequency Sweep 42
To Output A Burst Waveform 44
To Trigger A Sweep Or Burst 46
To Store The Instrument State 47
To Configure The Remote Interface 48
Chapter 3 Features And Functions 53
Output Configuration 55
Pulse Waveforms 70
Amplitude Modulation (Am) 74
Frequency Modulation (Fm) 79
Phase Modulation (Pm) 85
Frequency-Shift Keying (Fsk) Modulation 89
Pulse Width Modulation (Pwm) 93
Frequency Sweep 99
Burst Mode 106
9