Table of Contents
Advertisement
ASCII file commands
In addition to the unique ASCII file commands described here, the
user may wish to include some standard FORMat commands in the
ASCII file, such as those that are used to specify the clock or output
mode.
The only FORMat commands that are permitted are FORMat: MODe,
CLOCk, and DELay. Refer to Chapter 3 for the syntax of these
commands.
Note that there is no section header prefix for these ASCII file
command strings.
Refer to the example programs at the end of this chapter for usage
examples of the various commands described in this chapter.
ASCDown Command
Command
ASCDown
The ASCdown command is used to signal the start of an ASCII file load. It
causes the current pattern generator label and sequence structures to be
cleared and reset to a default state.
The ASCDown command must precede any label definitions and the data
portion of an ASCII file load.
Example
ASCDown
6–3
Advertisement
Table of Contents
