Adding Media Gateways - Avaya G700 Installation And Upgrades

Adding Media Gateways

When you are logged in to MultiVantage via SAT, you will be able to add G700 Media Gateways to the
system.
Add Media Gateways
Begin
type add media-gateway <number>
1.
where <number> is the gateway number from 1 to 9.
Complete the Name field with the hostname assigned to the G700 Media Gateway.
2.
Complete the Identifier field with the serial number of the G700 Media Gateway. You can obtain
3.
the serial number from the sticker attached to the G700 Media Gateway or perform "Check the
Serial Number of the G700 Media Gateway Processor" on page 37.
Complete the Network Region field with the value supplied in the planning documentation.
4.
Note: The IP Address, MAC Address, and Module Type fields are populated
automatically after the G700 media gateway registers with the server.
Figure 19. Add Media Gateway Screen
The Media Modules installed in the gateway are listed alongside their Bay number.
Accept the screen.
5.
End
Installation and Upgrades for G700
555-234-100 – Issue 1 – May 2002
TM
3 Avaya S8300 Media Server: Performing Initial Administration
63