Avaya G700 Installation And Upgrades page 63

- Choose Disable NTP if the user does not want the Network Time Server to run on the S8300
Media Server.
- Choose This computer is a Network Time Server to enter the IP address for a single
time server.
- Choose Use these Network Time Servers to enter up to three time servers.
- Choose Enable NTP if the S8300 Media Server will be the primary NTP server. Optionally,
you can provide the address of the survivable S8300 Media Server in the local survivable
configuration
- Choose Customer-Defined Network Time Servers by entering the IP addresses of the
selected time servers and set Multicast Client Support to Yes.
You will need data from the customer's LAN administrator to complete the fields: Trusted Key,
Requested Key, and Control Key. If a keys file is necessary, you will have to download the file to
the appropriate directory.
Click Continue.
At the next screen, Set Modem Interface, you may set up the Modem Interface IP Address for
Avaya-provided service.
The Modem IP Address is assigned by services and should be included in your planning document.
Click Continue.
The next Warning screen indicates that the data entry process has concluded and that the system is
ready to be configured.
Installation and Upgrades for G700
555-234-100 – Issue 1 – May 2002
TM
3 Avaya S8300 Media Server: Network Setup with an Avaya S8300 Media Server
55