Avaya G700 Installation And Upgrades page 114

Appendix C: Equipment List:
Table 13. Equipment List: Media Modules Continued
Media Modules
Provides the ability to remotely troubleshoot the MM 710 T1/E1 Media Module.
It is required for any customer with a maintenance contract and highly
recommended for any other customer.
Material Code: 107988867
The MM760 VoIP Media Module is a clone of the motherboard VoIP engine. It
provides an additional 64 VoIP channels with G.711 compression. Each chassis
base system can support up to 64 G.711 single channel calls. If the desire is to
have an essentially non-blocking system, an additional MM760 VoIP Media
Module needs to be added if more than two MM710 T1/E1 Media Modules are
used in a single chassis. This will provide for an additional 64 channels.
This VoIP conversion resource in the G700 Media Gateway is an improved
version of the Prowler board resource and from a configuration perspective, the
two are the same. The capacity is 64 G.711 TDM/IP simultaneous calls, or 32
compression codec (G.729 or G.723) TDM/IP simultaneous calls. These call
types can be mixed on the same resource, so we say that the simultaneous call
capacity of the resource is 64 "G.711 Equivalent Calls".
Material Code: 170901
ComCode (for Maintenance Ordering Only): 108919986
The MM712 DCP Media Module allows connectivity of up to 8 two-wire DCP
voice terminals. MM712 will not support 4-Wire DCP telephones.
Material Code: 170898
ComCode (for Maintenance Ordering Only): 108919952
106
Apparatus Code: None
MM760 VoIP Media Module
Apparatus Code: MM760
MM712 DCP Media Module
Apparatus Code: MM712
MM711 Analog Media Module
Required for any customer
with a maintenance
contract and an MM710
T1/E1 Media Module,
highly recommend for
other customers to avoid
expensive technician visits.
Optional
Optional
Installation and Upgrades for G700
555-234-100 – Issue 1 – May 2002
2 of 3