Avaya G700 Installation And Upgrades page 86

5 Upgrading/Downloading Software/Firmware: Setting Up the External TFTP Server (If Necessary)
At the Avaya support site, select the following sequence of menu options:
2.
Select AVAYA 4630 IP Telephone Release 1.6 and TFTP Server or latest version
3.
Scroll to bottom of page to find iptel_avaya_tftp.exe
4.
Double-check on the program and download it to the TFTP server. You may also wish to
5.
download and view or print the file iptel.pdf, which provides instructions on installing the
iptel_avaya_tftp.exe for Windows servers.
After copying the iptel_avaya_tftp.exe file to the server, double-check it to install it, and follow
6.
instructions.
When the file has been installed, open the program tftpserver32.
7.
8. Create a folder on the TFTP server for the upgrade files (for example, tftpboot).
Enable the server as follows:
9.
For NT and Windows 2000 or higher operating systems, set the following:
a . Click on System from menu bar and select setup.
The server option window appears.
- Select the Outbound tab, and enter the outbound file path to C:\tftpboot - Enter this or your
alternate tftp location in the Outbound tab.
- Under Options tab, enter 69 in the Use Port field (default).
- Select No Incoming (default). However, if you wish to copy files as a backup prior to
performing an upgrade of software, leave this field unchecked.
- Verify that you have a valid inbound path by checking the path on the Incoming tab of the
Server Options window.
- Click OK.
Download the G700.<release_num>.tar.gz file using the following method:
10.
a . Access the C:\tftpboot directory.
b . Use winzip or another zipfile tool to unzip the file wrt
78
Installation and Upgrades for G700
555-234-100 – Issue 1 – May 2002