Dcs+ Over Isdn-Pri Administration - Avaya G700 Installation And Upgrades

4 Connecting to Other Systems: Networking an Avaya
Figure 22. ISDN Networking Configuration for S8300 With DCS+

DCS+ Over ISDN-PRI Administration

For full details on administering a switch network for the S8300, S8100 and S8700 Media Servers, as well
as the DEFINITY Server, see "Administration for Network Connectivity for Avaya MultiVantage
Software, 555-233-504". The administration for these switches is almost identical.
Switches in the ISDN-based DCS network require administration for the following:
Table 6. Administration of ISDN-Based DCS Network
Administration Task
Establish physical connections to the
network
Check that System-Parameters Customer-
Options has the correct options.
Administer DS-1 Circuit Packs or MM710
T1/E1 Media Module
74
TM
S8300 Media Server to Other Switches
Comment
For the S8300, the physical connection is
the MM710 T1/E1 Media Module. Other
systems require a TN464 or TN767 circuit
pack.
Private Networking, ISDN-PRI, and DCS or
QSIG should be enabled. If CAS and/or
Centralized Messaging are to be used with
QSIG, CAS and Centralized Messaging will
also need to be enabled.
For S8300, you administer the MM710
T1/E1 Media Module. For DEFINITY,
S8700, and DEFINITY One/IP600, you
administer a TN464 or TN767 circuit pack.
Installation and Upgrades for G700
555-234-100 – Issue 1 – May 2002
TM