Connect Media Gateways - Avaya S8300 Hardware Installation

5

Connect Media Gateways

Note: Complete this step only if you are connecting more than one G700
Media Gateway in a stack configuration.
1
Using the gray X330SC short cables,
connect the media gateways from the
bottom up:
•
Connect the light gray connector to the
port labeled "Cable to upper unit."
•
Connect the dark gray connector to the
port labeled "Cable to lower unit."
•
Repeat both steps until all units in the
stack are connected (maximum of 10
units).
2
For single stack redundancy, connect the
bottom unit and the top unit using the
black X330RC redundancy cable:
•
Connect the light gray connector to the
port labeled "Cable to upper unit: on
the top unit of the stack.
•
Connect the dark gray connector to the
port labeled "Cable to lower unit" on
the bottom unit of the stack.
17