Dcs+ Over Ip Administration - Avaya G700 Installation And Upgrades

4 Connecting to Other Systems: Networking an Avaya

DCS+ Over IP Administration

For full details on administering a switch network for the S8300, S8100 and S8700 Media Servers, as well
as the DEFINITY Server, see "Administration for Network Connectivity for Avaya MultiVantage
Software, 555-233-504". The administration for these switches is almost identical.
Switches in the IP-based DCS network require administration for the following:
Table 5. Administration of IP-Based DCS Network
Administration Task
Establish physical connections to the
network
Check that System-Parameters Customer-
Options has the correct options.
Administer CLAN Circuit Packs
Assign Data Modules
Assign IP Node Names
Define IP Interfaces
72
TM
S8300 Media Server to Other Switches
Comment
For the S8300, the physical connection is
simply through one of the two standard
ethernet ports.
Private Networking, Uniform Dial Plan,
ISDN-PRI, DCS or QSIG, and H.323 trunks
should be enabled. If CAS and/or
Centralized Messaging are to be used with
QSIG, CAS and Centralized Messaging will
also need to be enabled.
For S8700 and DEFINITY csi, si, and r only.
You do not administer a CLAN circuit pack
for DEFINITY One/IP600 or S8300.
For DEFINITY csi, si, and r only. You do not
administer an ethernet data module for
S8300, S8700, and DEFINITY One/IP600.
Add names and IP addresses for each
node in the network. See also, " INTUITY
®
AUDIX LX Release 1.0 LAN Integration
with S8300 and DEFINITY
Add the subnet mask and gateway address
for the S8300 processor. For S8300, PROC
is automatically populated in the Type field,
whereas C-LAN or MEDPRO are types for
other switches.
Installation and Upgrades for G700
555-234-100 – Issue 1 – May 2002
TM
TM
®
Systems ".