TM
3 Avaya
S8300 Media Server: Network Setup with an Avaya S8300 Media Server
Click Continue.
At the Updating System Files you may watch the progress of the configuration.
When the process is complete, you will receive a notification. Click Close Window and continue
the configuration of the G700 Media Gateway on the command line interface.
You have now configured the Avaya S8300 Media Server. You may also have to upgrade software
(see "Chapter 5, Upgrading/Downloading Software/Firmware"). You will then be ready to establish
IP identities for the Avaya P330 processor on the G700 Media Gateway and the G700 Media
Gateway processor.
Note: You will also have to setup the INADS alarm via a command line. Call your
service support center.
56
Installation and Upgrades for G700
555-234-100 – Issue 1 – May 2002