TM
3 Avaya
S8300 Media Server: Avaya S8300 Media Server
Avaya S8300 Media Server
The Avaya S8300 Media Server will be installed in the left Media Module bay (v1). For more complete
information about the S8300 Media Server, consult "Access Procedures" in the Welcome to Avaya
Media Server and Avaya
Figure 11. Avaya S8300 Media Server
Inserting the Avaya
Necessary for Standalone Service or LSP)
The S8300 Media Server is inserted into the G700 Media Gateway slot #1 (v1) whether it is the primary
server or configured as a Local Survivable Processor (LSP). The S8300 Media Server can only be inserted
in the slot (v1) on the left side of the G700 Media Gateway. The LED module must be pulled from its
housing to provide clearance for the S8300 Media Server.
!
CAUTION:
If you are removing an S8300, use the shutdown button to stop the operating system. The
OK to Remove LED will light when it is safe to remove the S8300.
Insert the S8300 Media Server into Slot #1 of the G700 Media Gateway
Begin
Clear the left side of the G700 Media Gateway.
1.
a . Remove the blank plate from slot #1.
b . Then, disengage the LED module and remove it from the G700 Media Gateway.
c . Line up the Avaya S8300 Media Server module squarely with its bay opening.
44
G700 Media Gateway.
TM
S8300 Media Server (If
TM
Installation and Upgrades for G700
555-234-100 – Issue 1 – May 2002
S8300
TM